Teakdecking Systems
Teakdecking Systems pre-manufactures teakdecks in pre-trimmed panels for ships & yachts. Planks can be straight or curved to the planksheer of the vessel. Our craftsmen also create beautiful custom interior floors using the same patented system. We perform installations and refurbishments worldwide and carry TDS caulking, cleaners, epoxies and adhesives.
Innovations & solutions
Products
show more >>
ECO-100 TEAK CLEANER POWDER
ECO-100 Teak Cleaner Powder
ECO-100 Teak Cleaner Powder
ECO-100 Teak Cleaner Powder is a NEW high performance, concentrated teak cleaner. Even though ECO-100 Teak Cleaner Powder contains no acid, caustic sodas and phosphates, it is a very powerful and effective cleaner that cleans and brightens without removing the soft fibers of your teak. It mixes easily in water and is designed to not harm your teak, caulking, hardware or paint. This product has been formulated to be 100% environmentally-friendly and represents the most advanced truly “green” teak cleaner pow
TDS FE-220T FITTING EPOXY
FE-220T Low Temperature Cure
FE-220T Low Temperature Cure
TDS Fitting Epoxy FE-220T is a non-corrosive, custom-blended flexible mastic of high quality epoxy resins and activators, to yield a flexible bonding system for teak and on other woods, fiberglass, aluminum and steel. Internal fibre reinforcement provides excellent strength for bonding to the substrate. Once cured, this epoxy serves as an additional corrosion barrier to the sub-surface.0D;
TDS Fitting Epoxy FE-220T will cure in temperatures as low as 4.4° C / 40° F.0D;
TDS Fitting Epoxy FE220T was developed t
TDS Fitting Epoxy FE-220T will cure in temperatures as low as 4.4° C / 40° F.0D;
TDS Fitting Epoxy FE220T was developed t
TDS FFE-200 FAIRING & FITTING EPOXY
TDS Fairing & Fitting Epoxy
TDS Fairing & Fitting Epoxy
TDS Fairing & Fitting Epoxy FFE-200 is a NEW 2-part epoxy system formulated to be easily sanded while maintaining excellent flexibility and high bond strength to all common marine substrates. It is non-corrosive and does not require induction time, even in cold weather. Once cured, TDS Fairing & Fitting Epoxy FFE-200 serves as an additional corrosion barrier to the sub-surface.0D;
TDS Fairing & Fitting Epoxy FFE-200 will cure in temperatures as low as 10° C/50° F.0D;
TDS Fairing & Fitting Epoxy FFE-200 was deve
TDS Fairing & Fitting Epoxy FFE-200 will cure in temperatures as low as 10° C/50° F.0D;
TDS Fairing & Fitting Epoxy FFE-200 was deve
TDS ECO-300 TEAK CLEANER LIQUID
Teak Cleaner Liquid
Teak Cleaner Liquid
Teak Cleaner Liquid is a specially-formulated cleaner which both brightens and is effective for both light and heavy cleaning in a ready-to-use form. Teak Cleaner Liquid is designed to not harm your teak, caulking, hardware or paint. Teak Cleaner Liquid contains no phosphates and is not hazardous to the user or the environment.
Teak Cleaner Liquid represents the state-of-the-art in cleaning ready-to-use formulations to clean your teak or other surfaces.
Teak Cleaner Liquid represents the state-of-the-art in cleaning ready-to-use formulations to clean your teak or other surfaces.
TDS SIS 440 TEAK DECK CAULKING
TDS Teak Deck Caulking
TDS Teak Deck Caulking
TDS Deck Caulking is a primer free one-part, silane polymer, paste-like neutral cure seam sealant, which, when exposed to moisture in the air, reacts to form a tough, flexible, solid rubber compound. It has additional bonding agents in it that eliminate the need to use a primer. TDS SIS 440 Caulking is a thixotropic material, which does not sag during cure, and, when cured, has excellent temperature stability and chemical resistance. Because the sealant is neutral cure, it is non-corrosive to all substrates
TDS FE-180A Fitting Epoxy
FE-180A Fitting Epoxy-Outstanding Bond Strength
FE-180A Fitting Epoxy-Outstanding Bond Strength
TDS Fitting Epoxy is a custom blended mastic of high quality epoxy resins and activators to yield a flexible bonding system for teak on other woods, fiberglass, aluminum and steel. Internal fiber reinforcement provides excellent strength for bonding to the substrate. Once cured, the Epoxy serves as an additional corrosion barrier to the substrate. TDS Fitting Epoxy will cure in temperatures as low as 40º F. Developed to be user-friendly; the simplified 1:1 mix ratio allows a batch of any size to be easily m
TDS FR-101 FAIRING EPOXY
FR-101 Unfilled Epoxy
FR-101 Unfilled Epoxy
TDS FR-101 1:1 Fairing Epoxy is a low viscosity, 2-part epoxy system formulated to accept high filler loadings while maintaining excellent flexibility and to bond well to all common marine substrates. It is D.O.T. non-corrosive and requires no induction time, even in cold weather.