Marine electronics & instrumentation
Maretron, a world leader in vessel monitoring and control systems, designs, manufactures, and markets leading edge products for commercial and recreational marine markets. Our products are highly integrated to provide a common user interface to the equipment and systems commonly found onboard a vessel. Maretron’s corporate philosophy is to provide premium quality, state-of-the-art vessel monitoring and control products that work in conjunction with traditional navigation techniques for the highest level of
Innovations & solutions
Products
show more >>
ACM100
Alternating Current (AC) Monitor
Alternating Current (AC) Monitor
Maretron’s ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. The ACM100 can monitor power busses, generators, or utility power. ACM100 output information is then displayed with networked NMEA 2000® equipment such as the Maretron DSM250 dedicated display or with NMEA 2000® compatible software such as Maretron N2KView. Best of all, the ACM100 is NMEA 2000® certified so you can view any and all AC informatio
GPS Antenna/Receiver
NMEA 2000 GPS Antenna/Receiver
NMEA 2000 GPS Antenna/Receiver
Maretron's GPS200 is a state-of-the-art 32 channel GPS antenna and receiver capable of providing five position fixes per second, accurate boat speed four times per second, and precision time once per second. An additional benefit of the GPS200 is that it broadcasts precision magnetic variation information using the current position and world magnetic model (WMM-2010). 0D;
0D;
0D;
The GPS200 antenna/receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000® Standard. It will directl
0D;
0D;
The GPS200 antenna/receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000® Standard. It will directl
Tank Level Monitor (24" depth gasoline)
NMEA 2000 Tank Level Monitor (24" depth gasoline)
NMEA 2000 Tank Level Monitor (24" depth gasoline)
Maretron's TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM150 calculates and broadcast the fluid level over the NMEA 2000® network, you
Tank Level Monitor (104" depth)
NMEA 2000 Tank Level Monitor (104" depth tanks)
NMEA 2000 Tank Level Monitor (104" depth tanks)
Maretron's TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM200 calculates and broadcast the fluid level over the NMEA 2000® network, you can obser
Run Indicator Module
NMEA 2000 Run Indicator Module
NMEA 2000 Run Indicator Module
Maretron’s Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000® network, whether or not the electrical circuit is energized and running. The RIM100 works equally as well for monitoring manually switched loads (e.g., running lights, anchor lights, or deck lights) as it does for automatically switched loads. Monitoring automatically switched loads (e.g., bilge pumps, engine exhaust/intake fans, and transfer pumps) via the RIM100 is especially useful because you know
Switch Indicator Module
NMEA 2000 Switch Indicator Module
NMEA 2000 Switch Indicator Module
0D;
0D;
Maretron’s Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (e.g., heat, smoke, carbon monoxide, explosive vapor detectors), security systems (e.g., motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (e.g., valve closed/open, high water bilge). The SIM100 continually monitors these switch closure devices and broadcasts information over the NMEA 2000 network about the switch state so the crew can be
0D;
Maretron’s Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (e.g., heat, smoke, carbon monoxide, explosive vapor detectors), security systems (e.g., motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (e.g., valve closed/open, high water bilge). The SIM100 continually monitors these switch closure devices and broadcasts information over the NMEA 2000 network about the switch state so the crew can be
Temperature Monitor
NMEA 2000 Temperature Module
NMEA 2000 Temperature Module
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, engine room air temperature, refrigerator/freezer temperature, under bolt temperature (inverters, charges, pumps, motors, etc.), tank temperatures (live well bait, h
Tank Level Monitor (40" depth)
NMEA 2000 Tank Level Monitor for 40" Depth Tanks
NMEA 2000 Tank Level Monitor for 40" Depth Tanks
Maretron's TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult to handle long probes protruding into the tank, which often foul and/or corrode. Once the TLM100 calculates and transmits the fluid level over the NMEA 2000® network, you can ob
Alarm Module
NMEA 2000 Certified Alarm Module
NMEA 2000 Certified Alarm Module
Maretron’s Alarm Module generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105 dB SPL Piezoelectric sounder, along with a red high-brightness LED to indicate an alarm condition. A second green LED incidates that the Alarm Module is powered and ready to be triggered. The audible alarm can sound any one of 32 distinct pre-programmed patterns to indicate different alerts. The Alarm Module can be triggered by alarms generated by Maretron’s N2KView Vessel
N2KBuilder
NMEA 200 Network Design Software
NMEA 200 Network Design Software
N2KBuilder™ is a graphical NMEA 2000® network editor which provides consistency and continuity across the entire NMEA 2000® network design workflow. It is essentially CAD for NMEA2000® networks.0D;
• In the conceptual phase the designer draws out the network and decides what sensors and display units will be connected, and where they will be placed in the vessel. 0D;
N2KBuilder™ provides a graphical editor to layout the cables, connectors and devices. Sufficient detail is added for each device to identify thei
• In the conceptual phase the designer draws out the network and decides what sensors and display units will be connected, and where they will be placed in the vessel. 0D;
N2KBuilder™ provides a graphical editor to layout the cables, connectors and devices. Sufficient detail is added for each device to identify thei
Maretron Cloud Services
Cloud Services
Cloud Services
Maretron Cloud Services allows you to remotely connect to your vessel using N2KView®or N2KView®-Mobile software to monitor and control your vessel from any location. With an Internet connection to the vessel, Maretron's IPG100 will automatically log into Maretron's Internet cloud server and the vessel's information will be made available to any remote N2KView® or N2KView® Mobile.
N2KView
N2KView Software
N2KView Software
Maretron's N2KView® software displays the information you need including engines, generators, tanks, rudders, navigation instruments, local weather, and more from any location. N2KView® is completely user-configurable to create different screens for your exact needs while easily switching from screen to screen for monitoring all your systems.
WSO100
Ultrasonic Wind and Weather Station
Ultrasonic Wind and Weather Station
Maretron's WSO100 measures wind speed/direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts. WSO100 accurately measures wind speed and direction under tilt of up to 30°, making it ideal for sail as well as power conditions.
VDR100
Vessel Data Recorder
Vessel Data Recorder
Maretron's Vessel Data Recorder (VDR100) is used to record messages transmitted from every product interconnected on the vessel's NMEA 2000® network. Each message is stored using solid-state memory technology with simple data retrieval via a removable USB flash drive (purchased separately).
USB100 - NMEA2000 USB Gateway
USB100 - NMEA2000 USB Gateway
USB100 - NMEA2000 USB Gateway
Maretron's USB100 is a gateway for bridging computers to an NMEA network. This allows you to use PC based vessel monitoring and control software like Maretron's N2KView® or PC based navigation software. The gateway provides one simple connection between the network and the PC.
TSM1330 - 13” Monitoring and Control Touchscreen
13” Vessel Monitoring and Control Touchscreen
13” Vessel Monitoring and Control Touchscreen
The TSM800 is a 13” dedicated touchscreen preloaded with Maretron’s N2KView® vessel monitoring and control software. The software allows you to configure as many favorite screens needed with the information you want to see. TSM1330 provides a simple touch interface for monitoring and controlling critical systems anywhere on the vessel.
TSM800 - 8” Monitoring and Control Touchscreen
8” Vessel Monitoring and Control Touchscreen
8” Vessel Monitoring and Control Touchscreen
The TSM800 is an 8” dedicated touchscreen preloaded with Maretron’s N2KView® vessel monitoring and control software. The software allows you to configure as many favorite screens needed with the information you want to see. TSM800 provides a simple touch interface for monitoring and controlling critical systems anywhere on the vessel.
TMP100 - Temperature Module
Temperature Module
Temperature Module
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes.
TLM200 - Tank Level Monitor (104” Depth)
Tank Level Monitor (104” Depth)
Tank Level Monitor (104” Depth)
Maretron's TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor.
TLM150 - Tank Level Monitor (Gasoline)
Tank Level Monitor (Gasoline)
Tank Level Monitor (Gasoline)
Maretron's TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor.
TLM100 - Tank Level Monitor (40” Depth)
Tank Level Monitor (40” Depth)
Tank Level Monitor (40” Depth)
Maretron's TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor.
TLA100 - Tank Level Adapter
Tank Level Adapter
Tank Level Adapter
The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM250.
SSC200 - Solid State Compass
Solid State Compass
Solid State Compass
Maretron’s SSC200 is a solid state, rate gyro electronic compass provides better than 1° heading accuracy through ±45° of roll and pitch angle, and better than 1° roll and pitch accuracy in static conditions. Each SSC200 is factory calibrated accuracy. It delivers precise, reliable heading information ten times per second.
SIM100 - Switch Indicator Module
Switch Indicator Module
Switch Indicator Module
Maretron’s SIM100 monitors switch closure devices including, but not limited to, safety equipment (e.g., heat, smoke, carbon monoxide, explosive vapor detectors), security systems (e.g., motion, vibrations, glass break, door or port hole magnetic switches), and vessel monitoring equipment (e.g., valve open/close, high water bilge).
RIM100 - Run Indicator Module
Run Indicator Module
Run Indicator Module
Maretron’s RIM100 monitors AC and DC electrical circuits and reports, over an NMEA 2000® network, whether or not the electrical circuit is energized and running. The RIM100 works well for the monitoring manually switched loads (e.g., running lights, anchor lights, or deck lights) as it does for automatically switched loads.
RAA100 - Rudder Angle Adapter
Rudder Angle Adapter
Rudder Angle Adapter
Maretron’s RAA100 is used to adapt commercially available resistive rudder senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there are NMEA 2000® compatible displays such as the Maretron DSM250.
N2KMeter
N2KMeter
N2KMeter
The N2K Meter enables trained and untrained personnel to diagnose and trouble-shoot network installations quickly and easily.
NBE100 - Network Bus Extender
Network Bus Extender
Network Bus Extender
Maretron’s NBE100 allows you to extend the maximum node count, network trunk length and cumulative device’s drop lengths of any NMEA 2000® network. The NBE100 solves bus errors and other electrical issues caused by exceeding any of these limitations and makes design of large networks easier.
MBB100 - Black Box Vessel Monitoring and Control
Black Box Vessel Monitoring and Control
Black Box Vessel Monitoring and Control
Maretron’s MBB100 is a dedicated processing unit that comes preloaded with Maretron’s N2KView® vessel monitoring and control software. Unlike a PC that allows any software to be loaded, the MBB100 runs only N2KView software making it extremely stable and dedicated to monitoring and controlling your vessel.
J2K100 - J1939 to NMEA2000 Gateway
J1939 to NMEA2000 Gateway
J1939 to NMEA2000 Gateway
Maretron’s J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 data to the marine digital interface (NMEA 2000®). Critical engine, transmission, and genset data is distributed throughout the vessel over a single cable which can be monitored by an NMEA 2000® compatible display.
IPG100 - Internet Protocol Gateway
Internet Protocol Gateway
Internet Protocol Gateway
Maretron’s IPG100 lets you connect Maretron black boxes (MBB100’s), Maretron’s touch screens (DMS800’s, TSM800 and TSM1330), PC’s, Mac’s, tablets, or smartphones to an NMEA 2000® network so you can monitor and control your vessel using Maretron’s N2KView® software.
GPS200 - GPS Antenna/Receiver
GPS Antenna/Receiver
GPS Antenna/Receiver
Maretron’s GPS200 is a state-of-the-art 32 channel GPS antenna and receiver capable of producing five position fixes per second. The GPS200 has unprecedented sensitivity and can even be mounted under a fiberglass deck. The GPS200 also broadcasts precision magnetic variation information using the current position and world magnetic model (WMM-2010).
FPM100 - Fluid Pressure Monitor
Fluid Pressure Monitor
Fluid Pressure Monitor
Maretron’s FPM100 is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible display.
FFM100 - Fuel/Fluid Flow Monitoring
Fuel/Fluid Flow Monitoring
Fuel/Fluid Flow Monitoring
Maretron’s FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating costs. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy and nearly as accurate as commercial vessel systems costing tens of thousands of dollar.
EMS100 - Analog Engine Monitoring System
Analog Engine Monitoring System
Analog Engine Monitoring System
Maretron’s EMS100 plugs directly into engine wiring harness and converts analog signals such as water temperature and oil pressure to the marine digital interface (NMEA 2000®). Critical engine data is distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000® compatible display.
DST110 - Depth/Speed/Temperature Triducer
Depth/Speed/Temperature Triducer
Depth/Speed/Temperature Triducer
Maretron’s DST110 Smart Retractable Depth/Speed/Temperature Transducer delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots – all with no programming or calibration necessary.
DSM800 - Vessel Monitoring & Control Display
Vessel Monitoring and Control Indoor Display
Vessel Monitoring and Control Indoor Display
The DSM800 is a dedicated touch screen that comes preloaded with Maretron’s N2KView® vessel monitoring and control software. The N2KView®software allows you to configure as many favorite screens as you want with exactly the information you want to see. The DSM800 is not recommended for outdoor use.
DSM250 - Multi-Function Color Display
Multi-Function Color Display
Multi-Function Color Display
Maretron’s DSM250 is a high-resolution sunlight viewable color display that displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM250 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad.
DCR100 - Direct Current Relay Module
Direct Current Relay Module
Direct Current Relay Module
Maretron’s DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10 amps. The DCR100 connects directly to an NMEA 2000® network, so you can turn on off the relays form any device onboard or remotely running Maretron’s N2KView® software.
DCM100 - Direct Current Monitor
Direct Current Monitor
Direct Current Monitor
Maretron’s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels and wind generators.
ALM100 - Alarm Module
Alarm Module
Alarm Module
Maretron’s ALM100 generates visual and audible alerts for any monitored condition. The Alarm Module includes an extremely loud 105dB Piezoelectric sounder, along with a red high-brightness LED to indicate an alarm condition. A second green LED indicates that the Alarm Module is powered and ready to be triggered.
ACM100 - Alternating Current (AC) Monitor
Alternating Current (AC) Monitor
Alternating Current (AC) Monitor
Maretron’s ACM100 is a device which monitors AC power sources and outputs information onto the industry standard NMEA 2000® marine data network. ACM100 output information is displayed with NMEA 2000® equipment such as the Maretron DSM250 display or NMEA 2000®compatible software such as Maretron N2KView®.