Swedish Manufacturer of Yacht Equipment
Rutgerson is a world leading manufacturer of sail fittings, deck hardware, portlights and hatches. All our products are made in Marstrand on the Swedish west coast, where the company was founded in 1976. Today we are represented in more than 40 countries, and our products are renowned for their reliability and innovative design among sailmakers and boat builders all over the world.
New products
Products
show more >>
ROC Organiser
Aluminum Organisers for Big Boats and High Loads.
Aluminum Organisers for Big Boats and High Loads.
Rutgerson’s new ROC Organisers in aluminum are especially developed for smooth and safe line handling on big boats with high loads. Each sheave is bolted through deck and has a durable Kevlar bearing which together with the strong design gives a very low friction and superior breaking load. The ROC Organisers are available with two, three, four, five or six 60 mm sheaves in aluminum, and can be stacked on top of each other to maximize efficiency of deck space.
Rope Clutch RC75
Clever Rope Clutch Optimised for Modern Lines
Clever Rope Clutch Optimised for Modern Lines
Rutgerson’s strong and reliable rope clutch RC75 is now available in two different versions to meet the trend towards thinner and more high-tech lines.
The standard RC75X optimized for 8-12mm lines, whilst the latest addition RC75S can be used
on 4-8mm lines. Both versions are offered as single, double, triple and quintuple clutches, and have a unique sheave to allow easy line handling and minimize wear.
The standard RC75X optimized for 8-12mm lines, whilst the latest addition RC75S can be used
on 4-8mm lines. Both versions are offered as single, double, triple and quintuple clutches, and have a unique sheave to allow easy line handling and minimize wear.
ROC Deck Block
Deck Blocks for Big Boats and High Loads.
Deck Blocks for Big Boats and High Loads.
The latest member of our popular ROC Block family is an assortment of extremely strong and
durable deck blocks in aluminum. They have the same innovative roller-bearing system as our
reliable ROC Blocks, allowing easy line handling and incredibly low friction also under very high
loads. Thanks to a unique design these deck blocks permits the line to pass both under and over
the top of the sheave, depending on your needs.
durable deck blocks in aluminum. They have the same innovative roller-bearing system as our
reliable ROC Blocks, allowing easy line handling and incredibly low friction also under very high
loads. Thanks to a unique design these deck blocks permits the line to pass both under and over
the top of the sheave, depending on your needs.
Rope Clutch RC120
Strong Rope Clutch Optimised for Modern Lines
Strong Rope Clutch Optimised for Modern Lines
Rutgerson’s strong and reliable rope clutch RC120 is now available in two different versions to meet the trend towards thinner and more high-tech lines.
The standard version RC120X optimized for 10-16mm lines, and the latest addition RC120S which can be used on 8-12mm lines. Both are offered as single, double and triple clutches. All equipped with a needle bearing and a unique sheave to minimize wear and allow easy line handling also under very high loads.
The standard version RC120X optimized for 10-16mm lines, and the latest addition RC120S which can be used on 8-12mm lines. Both are offered as single, double and triple clutches. All equipped with a needle bearing and a unique sheave to minimize wear and allow easy line handling also under very high loads.
Rutgerson Deck Fillers
Complete Assortment of Deck Fillers
Complete Assortment of Deck Fillers
Rutgerson’s deck fillers are now available in the two common hose sizes 38 mm and 50 mm as well as a third size, 54 mm, for fuel. All made in durable composite, so no need to worry about grounding or corrosion. They are also much lighter than similar products in casted-steel. The range includes fillers for diesel, petrol, water and waste, all color-coded to distinguish one from another.
Multihull Escape Hatch
When only the best is safe enough
When only the best is safe enough
This is the only certified multihull escape hatch on
the market with a flushed design, which gives minimal resistance in the water and significantly reduces the pressure on the hatch. The flush design also simplifies the installation. No recess or other adaption to the hull is needed. The 12mm tinted acrylic glass is bolted to the stainless-steel frame and the hatch has double rubber seals for optimal waterproofness.
the market with a flushed design, which gives minimal resistance in the water and significantly reduces the pressure on the hatch. The flush design also simplifies the installation. No recess or other adaption to the hull is needed. The 12mm tinted acrylic glass is bolted to the stainless-steel frame and the hatch has double rubber seals for optimal waterproofness.
Slide Connector
The clever alternative to battcars
The clever alternative to battcars
We are proud to introduce the Slide Connector, a simple, yet clever product designed to be used as a linkage between our batten receptacles and pressure absorbing slides.
The Slide Connector effectively transfers the pressure from the batten onto the slide and works as a cost-efficient alternative to standard battcars on boats up to 35 feet.
The Slide Connector is made of stainless steel and black composite and has a threaded M10 stud in one end and a universal toggle in the other.
The Slide Connector effectively transfers the pressure from the batten onto the slide and works as a cost-efficient alternative to standard battcars on boats up to 35 feet.
The Slide Connector is made of stainless steel and black composite and has a threaded M10 stud in one end and a universal toggle in the other.
Batten Receptacle 1587
User-friendly batten receptacle in composite
User-friendly batten receptacle in composite
The new batten receptacle 1587 is made of a glass fiber reinforced composite which is extremely durable and UV resistant. It is dimensioned for boats from 30-42* feet, and can be used with either round or flat battens. The clean and user-friendly design is inspired from our popular batten receptacle range in aluminum. No tools are required to open the lid. You simply press the button and slide off the lid whenever you need to insert or remove a batten.