2000+ deck hardware products for boats up to 50ft
For more than 75 years Barton Marine has set the benchmark for high quality marine deck hardware. Our products are made in the UK at our purpose-built factory in Whitstable on the North Kent Coast, with a range running to more than 2,000 specialist products. Through our trusted distribution partners, our products can be found in leading chandleries in more than 40 countries around the world. Visit our expert team to find out about our new innovations for 2023.
Innovations & solutions
Products
show more >>
Carbon Fibre Tiller Extensions
High performance, light weight, solid grip.
High performance, light weight, solid grip.
Brilliantly coloured carbon tiller extensions are available in a range of lengths for every dinghy sailor. They are light weight but incredibly strong. The bespoke grip is double bonded into the carbon fibre shaft and runs the length of the tiller extension. The grip will not degrade or wear off but will last the life of the product. Designed and built in the UK by carbon fibre specialists CFbyL&L, these are the new racy, brilliantly fluorescent, colourful must-have for serious dinghy sailors and clubs.
Tuphblox - Tufnol Blocks
Traditional Tufnol blocks return!
Traditional Tufnol blocks return!
The laminated fabric and resin material called Tufnol, is a registered trade mark and used produce the Barton Tuphblox range of pulley blocks and cleats. Barton used Tufnol for making marine gear in the 1940's to replace the leisure marine steel components of the day. Barton moved to plastic injection moulding in the 1960's, and the use of Tufnol ended. Now 70 years later, Barton returns to its original production of Tufnol blocks to produce this range again given demand and request from customers worldwide
Barton New Genoa Cars
Redesigned and available in 20mm, 25mm & 32mm.
Redesigned and available in 20mm, 25mm & 32mm.
Introducing a new range of Genoa Cars and Sliders for release in 2024. These new sleek designs run on 20mm 25mm & 32mm 'T' track. All are manufactured in the UK from high quality marine grade aluminium and finished with our unique 'Spectro' grey or black anodised finish for added protection.
The new racy designs by Barton feature moulded nylon inserts to ensure free and smooth running under load and prevents damage or corrosion to finish.
Genoa cars are also available in a heavy-duty version.
The new racy designs by Barton feature moulded nylon inserts to ensure free and smooth running under load and prevents damage or corrosion to finish.
Genoa cars are also available in a heavy-duty version.
Outboard Motor Lifting Sling
A secure, manoeuvrable way to handle your motor.
A secure, manoeuvrable way to handle your motor.
New Barton Outboard Motor Sling was designed for customers worldwide who told us they desired a quality sling that securely held outboard motors for easy lifting or maintenance without slipping or wafting during use. The new Sling holds motors up to 15hp and is made from high performance polycarbonate woven webbing and high strength polycarbonate fasteners to protect the engine from wear and to maintain balanced holding power. For use with Barton's SkyLock Block which will lift and lock the line securely.
High Load Eyes - Low Friction Rings
Lightweight but incredibly strong.
Due to the formidable success of its High Load Low Friction Eye/Ring range, Barton Marine has launched a new size Eye with a 9mm bore for use with control lines up to 4mm. The Safe Working Load is rated at 550kg yet the weight is a staggering 3grams!
The hard anodising HV500 has amazing low friction properties and after 300 continuous hours on an Independent abrasion test machine no visual signs of wear on the anodising coating could be found.
Lightweight but incredibly strong.
Due to the formidable success of its High Load Low Friction Eye/Ring range, Barton Marine has launched a new size Eye with a 9mm bore for use with control lines up to 4mm. The Safe Working Load is rated at 550kg yet the weight is a staggering 3grams!
The hard anodising HV500 has amazing low friction properties and after 300 continuous hours on an Independent abrasion test machine no visual signs of wear on the anodising coating could be found.
Windicator range
Top choice of NZ Sailors
Top choice of NZ Sailors
The Windicator Range is synonymous with the Kiwi Yachting scene. They have been made in New Zealand for over 30 years and are designed and manufactured by precision engineers and made from the best available materials; considered the best wind direction indicator by leading sailors and riggers. Introducing five models from the range for Optimists, Toppers, Lasers, Aeros, Yachts 6-8m and yachts 8m plus. UK & Europe only
Flush Mount Deck Plates
Stainless steel sealed mount system for yachts and
Stainless steel sealed mount system for yachts and
Introducing the Barton flush mount deck plates with optional fixing eye. Turned from solid bar 316 stainless steel with a highly polished finish, the deck plates are offered in three standard thread sizes – M8, M10 and M12. Designed to be mounted flush with the deck using three fixing bolts, the sealed internal thread prevents water ingress, the design prevents trip hazards onboard when not in use. The range allows for a multitude of uses: temporary fixing eyes, boat tie downs, deck mounts etc.
SkyLock 800
Self locking control line block
Self locking control line block
The Barton SkyLock 800 features 316 stainless steel side plates, glass reinforced nylon cover plates and aluminium cam to ensure a long service life with minimal maintenance. The clever design and positioning of the locking cams means the control line will never slip even when accidentally released. Designed for use in conjunction with 3:1 or 4:1 purchase systems using 8-12mm line. Can be used within a davit hoist system to lift dinghies, outboards, provisions and equipment on board.