show more >>
Environmentally sealed electrical connectors
When the electrical system is in a marine environment, these factors can leave watercraft dead in the water. That’s why many manufacturers of boats and personal watercraft use TE’s environmentally sealed electrical connectors. TE’s connectors are designed to withstand immersion in three feet of water. You’ll find the TE name on the critical connectors on your bilge pump, navigation system, starter, or anywhere failure isn’t an option.
Innovations & solutions
Products
show more >>
TE ICT - AMP Superseal 1.5
Electrical Connectors
Electrical Connectors
Key features:
• Compact system minimizes packaging requirements
• Sealing reliability proven under harsh conditions
• Designed for ease of manual harness assembly, engine mounting and under hood environments
• Compact system minimizes packaging requirements
• Sealing reliability proven under harsh conditions
• Designed for ease of manual harness assembly, engine mounting and under hood environments
TE ICT – High Voltage Connectivity
Electrical Connectors
Electrical Connectors
Key features:
• From 12 V to 1000 V
• From 1 to 3 position
• IP2X finger protection
• IP6k9k sealing
• From 12 V to 1000 V
• From 1 to 3 position
• IP2X finger protection
• IP6k9k sealing
TE ICT – Infotainment Connectivity
Infotainment connectors
Infotainment connectors
Key features:
• Optical, electrical and coaxial data transmission lines
• Full range of Fakra compliant harness and PCB connectors as well as cable assemblies
• MOST 25 & 150 based on optical as well as eMOST
• German AK HSD interface, USCAR 30 (Mini USB)
• Various shielded connections systems
• Conforms to various protocols, 1 and 4 channel LVDS, GVIF, IDB 1394, eMOST and USB 2.0
• Optical, electrical and coaxial data transmission lines
• Full range of Fakra compliant harness and PCB connectors as well as cable assemblies
• MOST 25 & 150 based on optical as well as eMOST
• German AK HSD interface, USCAR 30 (Mini USB)
• Various shielded connections systems
• Conforms to various protocols, 1 and 4 channel LVDS, GVIF, IDB 1394, eMOST and USB 2.0
TE ICT – AMPSEAL 16 Connectors
Electrical connectors
Electrical connectors
Key features:
• 2 to 12 positions
• Size 16 pin and socket lanceless contact system per MIL-C-39029.
• Keying and polarization
• Current Rating up to 13A
• Operating temperature range -55° C to 120° C
• Vibration: acceleration value 21 g
• IP6k9k (with cover)
• 2 to 12 positions
• Size 16 pin and socket lanceless contact system per MIL-C-39029.
• Keying and polarization
• Current Rating up to 13A
• Operating temperature range -55° C to 120° C
• Vibration: acceleration value 21 g
• IP6k9k (with cover)
TE ICT – HDSCS (Heavy Duty Sealed Connector System
Electrical connectors
Electrical connectors
Key features:
• 2 to 18 ways
• AMP MCP terminals
• Single wire sealing
• Dust-, water protected IP6K7K, IP6K9K (with adapter cap)
• Max. temperature housings +140°C
• Vibration: acceleration value 17,7g
• Flammability : UL94 V0 rated
• 2 to 18 ways
• AMP MCP terminals
• Single wire sealing
• Dust-, water protected IP6K7K, IP6K9K (with adapter cap)
• Max. temperature housings +140°C
• Vibration: acceleration value 17,7g
• Flammability : UL94 V0 rated
TE ICT – LEAVYSEAL Connectors
Elctrical connectors
Elctrical connectors
Key features:
• AMP MCP terminals
• 15 to 120 ways
• Wire-to-wire and wire-to-device and bulkhead applications.
• Dust-, water protected IP6K7K, IP6K9K (with adapter cap)
• AMP MCP terminals
• 15 to 120 ways
• Wire-to-wire and wire-to-device and bulkhead applications.
• Dust-, water protected IP6K7K, IP6K9K (with adapter cap)
TE ICT – HFT5000
Heat shrink fabric tubing
Heat shrink fabric tubing
Key features:
• 2:1 heat shrink ratio
• Abrasion and cut through resistant at elevated temperature
• Highly flexible
• Breathable, no fluid entrapment
• Noise suppression
• Power cable protection
• Stays in place
• 2:1 heat shrink ratio
• Abrasion and cut through resistant at elevated temperature
• Highly flexible
• Breathable, no fluid entrapment
• Noise suppression
• Power cable protection
• Stays in place
TE ICT – Sensor Product Portfolio
Sensor products
Sensor products
• Position sensors
o Hall switches
o Travel sensors
o Angular sensors
• Speed sensors
o Wheel speed
o Transmission gear speed
• Sensor modules
o Hall switches
o Travel sensors
o Angular sensors
• Speed sensors
o Wheel speed
o Transmission gear speed
• Sensor modules
TE ICT – Relay Products
Relays
Relays
TE ICT – ACW (Automotive Composite Wire)
Automotive composite wire
Automotive composite wire
Key Features:
• Composite wall
• Flexible core
• Highly fluid resistant primary jacket
• Bonded materials prevent wicking
• Size range 0.35 mm² - 10.00 mm²
• 150° C rated 3000 hr
• Cross-linked irradiated insulation system
• Composite wall
• Flexible core
• Highly fluid resistant primary jacket
• Bonded materials prevent wicking
• Size range 0.35 mm² - 10.00 mm²
• 150° C rated 3000 hr
• Cross-linked irradiated insulation system
TE ICT – QSZH (Heat Shrink Tubing)
Heat shrink tubing
Heat shrink tubing
Key features:
• Replacement for RBK
• Installation benefits
• Zero halogen
• Watertight seal
• High shrink ratio 4:1 enables one size tube to protect many splice configurations
• Replacement for RBK
• Installation benefits
• Zero halogen
• Watertight seal
• High shrink ratio 4:1 enables one size tube to protect many splice configurations
DT Series
Electrical connectors
Electrical connectors
DEUTSCH DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility. The DT Series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.
DTP Series
Electrical connectors
Electrical connectors
DEUTSCH DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors.
The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.
The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.
DTM Series
Electrical connectors
Electrical connectors
DEUTSCH DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.
DTHD Series
Electrical connectors
Electrical connectors
DTHD connectors are single terminal connectors for heavy duty applications. Easy to install, environmentally sealed and compact in size, they are a simple, field serviceable alternative to a splice. DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line.
HD10 Series
Electrical connectors
Electrical connectors
The HD10 is an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. All HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts. The HD10 Series is heavily used for diagnostic connectors, eliminates problems associated with assembly and maintenance time, and is designed for long service life.
HD30 Series
Electrical connectors
Electrical connectors
DEUTSCH HD30 Series connectors are constructed from a metal shell developed to meet the needs of the heavy duty equipment and transportation industries. The HD30 features include quick connect-disconnect bayonet cou- pling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system.
HDP20 Series
Electrical connectors
Electrical connectors
The HDP20 Series is a heavy duty rated, environmentally sealed, composite shell, multi-pin connector. The composite thermoplastic shell is ideal in applications where chemicals can damage a connector housing. HDP20 features quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system.
DRC Series
Electrical connectors
Electrical connectors
The environmentally sealed DRC Series is a rectangular connector series that offers insert arrangements of 24, 40, 50, 60, 64, 70, 76, and 80 cavities and accept size 12, 16, and 20 contacts. Several mounting options are available including in-line, flange mount, and PCB mount.
DRB Series
Electrical connectors
Electrical connectors
The DRB Series connectors are heavy duty connectors ideal for bulkhead applications. They are designed to accommodate multiple wire gauges and feature high pin counts, including 48, 60, 102, and 128 cavities. To increase the design flexibility, the DRB Se- ries offers several mounting flange options and wire arrangements. The DRB Series is perfectly suited to on and off highway applications, marine, industrial, and agriculture markets in harsh environments.
EEC Boxes
Circuit board enclusures
Circuit board enclusures
TE Connectivity offers compact DEUTSCH circuit board enclosures that accept snap-in headers. The enclosure features a through hole mounting flange on each side, as well as optional venting. Designed with space to accommodate one or more DT or DTM Series interfaces, the headers feature 90° pins. A radial flange seal provides environmental sealing to the enclosure. The headers mate with the DT and DTM standard plugs.
Video
Presentation
Multimedia
hallo
hallo